Hello. I am wanting to jog and test my axis but nothing is moving. I used the ramps test file and all axis move smooth. But, when i use any firmware or print program i can not jog the axis. My question is exactly what has to be connected for ramps and firmware and program to say, ok you can move. Ex, does the thermistor have to be conneced? There must be something telling ramps do not move. I have tried sprinter and pronterface and now marlin. Read a thousand posts and watched endless videos. I am sure it is something simple i am not seeing. I thought my problems were over after dealing with a bad ramps board. But I am blessed.
Thanks in advance for any advice.
Joe
Thanks in advance for any advice.
Joe