Ok Calibration for Merlin is compleatly different from Sprinter, I thought I could just Copy the Steps and Endstops. I cannot get Merlin to work for me as reliably as Sprinter.the Steps and every part of the Calculations are Totaly Different.
Sprinter
#define _AXIS_STEP_PER_UNIT {83, 83, 3200/1.25, 400}
Merlin
#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200.0*8/3,760*1.1}
Yeah I know X=78.7402 Y=78.7402 Z=200.0*8/3 E=760*1.1
But what base did they use to get that Calibration I am assuming (E) is one compleat turn is 180Degrees times 1.1 full step divided by What 3.14 radious squred??
How did they come up with that figure and still have ot work?
Sprinter
#define _AXIS_STEP_PER_UNIT {83, 83, 3200/1.25, 400}
Merlin
#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200.0*8/3,760*1.1}
Yeah I know X=78.7402 Y=78.7402 Z=200.0*8/3 E=760*1.1
But what base did they use to get that Calibration I am assuming (E) is one compleat turn is 180Degrees times 1.1 full step divided by What 3.14 radious squred??
How did they come up with that figure and still have ot work?