Clik here to view.
RAMPS 1.4 Add SD CARD ADAPTER AUX2 pins (1 reply)
Hi guys i have this SD CARD ADAPTER s-l300.jpg [www.sav-3d.fr] and i want use it on Aux 2 pins how i can do that please Thank you
View ArticleRAMPS 1.4 stepper driver failure? (no replies)
Hi All, I'm new here, my name is mike and about 6 months ago I bought an Anet A6. Because this was not the quality printer I wanted, I made some pretty big modifications: - Added aluminum frame based...
View ArticleHow to wire galvos (ILDA) up with Ramps 1.4? (3 replies)
Hi there, I got a nice scanner head (not the china 70 Euro ones) with a f 430 Theta lens. Using an Arduino Mega & an additional bipolar circuit with a 12 bit DAC and 2 opamps I am able to paint...
View ArticleATX PSU shuts off while temperature is stable (3 replies)
Hello, I am currently using a RAMPS 1.4 (with Marlin 1.1.8) with an ATX PSU. The board is unmodified (12V input). While the extruder and the heatbed heat up (constant voltage on both outputs)...
View ArticleRamps 1.4 and CR-10 LCD display (no replies)
First post and and already asking for help! I just finished installing a Panucatt Re-Arm into my Ender 3. I am using Marlin and everything is working except for the LCD. Does anyone know how I should...
View ArticleCheap Chinese TB6600 with RAMPS (no replies)
Hey all, so I've bought 4 cheap Chinese TB6600 stepper drivers. [www.ebay.com] I have included 2 pictures. will add 1 picture more, from the chip on the downside of the PCB, soon. I thought they would...
View ArticleRamps 1.4 external sd card (no replies)
Hello everyone, ive bought an external sd card connector for my ramps 1.4 board but i dont know where to connect it to. Can someone help me with this please?
View Articleramps 1.4 short, display doesnt work anymore (3 replies)
Hello everyone, I´ve tried to connect my bltouch but i had the connector wired wrong so i created a short on the AUX-1 port. Now the lcd doesnt work anymore but the fans still work. The display only...
View ArticleClik here to view.
Hot end thermistor only reads when RAMPs 1.4 is powered off (1 reply)
My DiVinci 1.0 running RAMPs 1.4 started to behave weird lately. If the printer is off (Ramps not getting 12v) but the Mega is being powered via USB (5v only), the thermistor reads perfectly fine. But...
View ArticleNegative spikes, not sure what is going on :S (1 reply)
Hi all I got a strange one for you all. I'm using this board: [www.tindie.com] mega board is from: [store.arduino.cc] I have tried this to fix the issue: PID tuneNew wires for thermistor all the way...
View ArticleRamps Board burned out (2 replies)
Hello guys need a help about ramps 1.4 board so recently i purchased the ramps 1.4 kit and when i attached it to arduino and the LCD is connected (no other driver or heater or motor are connected) and...
View ArticleAvoid Bed pre-heat crashing MKS Gen L v1.0 board ? (1 reply)
HI, My flsun i3 plus works well but has an annoying habit of randomly rebooting as the bed heats up before printing starts. What would you do? I am thinking this might be momentary power shortage to...
View ArticleRAMPS PLUS 2 and E1 socket problem (K200 Delta, but related to the PCB , not...
Hi Total 3D printing newbie here, apoloies in advance if my terminology is wrong. I have a dual head K200 delta printer with a heated bed which I put together 8 months ago, but gave up due to...
View ArticleRemoving d1, checking before I do something (2 replies)
Hello, I would like to verify something before I modify our reprap board. I have a pre-assembled reprap 1.4 (with power source) and an arduino mega (with USB connected constantly). Is it required to...
View ArticleRamps 1.4 keep resetting after installing 2 stepper driver or more (7 replies)
I have marlin fw running but after I install 3 stepper driver my screen start getting dimmer. But after I install the last one my ramps 1.4 keep resetting. But after I remove all the driver it behave...
View ArticleCannot connect USB and PSU together (no replies)
Hello, I have an Arduino mega board with a reprap 1.4. The reprap is powered by a Lascar Electronics PSU 130, 12V. The Arduino is connected with USB. When I upload some software to the Arduino,...
View Articlehunt Down comunication errors on Ramps 1.4"ish" (4 replies)
hey everyone, I got some wired Issues like.. for 5month now and i dont find it. setup: Arduino Mega / modified Ramps Marlin 1.8 // 2.0-dev I can print.. 5-20miuts than i get com-errors and the serial...
View ArticleInstalled ATS PSU on MKS Gen 1.4, psu fan starts and stops (no replies)
So I have a corsair CX600 and I decided to install this on my 3d printer. I am using a MKS GEN 1.4 with latest Marlin. In marlin I set POWER_SUPPLY = 1 This enables the PS_ON_PIN on pin 4. following...
View ArticleRamps 1.4 Arduino Mega fried HELP ME FIND WHY (Is not voltage regulator ) (1...
So I was calibrating the stepper drivers on my Ramps 1.4 board when I touched the stepper driver with my screwdriver by mistake, That melted my Stepper motor connector and fried the voyage regulator...
View ArticleRamps 1.4 did not wake up without USB source (5 replies)
I everone, I am used to use my ramps board with rasp pi for months, today I've unmount my printer and I notice that the board not wake until I connect the Pi to the usb port. What could cause this?
View Article